Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.

CHOOSING THE RIGHT EPOXY RESIN

When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.

HARTOL LUX hard-drying oil

Oil for kitchen countertops, tables, and other load-bearing interior surfaces.

SOLIDA Liquid rigid polymer foam 5 kg+ 5 kg

Liquid polymeric foam that hardens into a very rigid foam in a few minutes with an exothermic reaction.

Need additional information?

Tax rate

22 %

Price with VAT:

158,60 €

ADD TO CART

SOLIDA

Solida is a two-component polymeric material that hardens into a rigid foam in a few minutes with an exothermic reaction.

One kilogramme of liquid SOLIDA produces approx. 5 litres of rigid foam in free foaming.

USE

- furniture parts

- prototypes (industrial design, model making)

- pipes, reservoars insulation

- casting figures (wood imitation)

- filler for unsinkable boats, ships

- mold making

- simple sandwich elements (containers, construction)

- sound and heat insulation

- scenography, theatre, film objects

- jewellery stands

PROPERTIES

Density at free foaming - open mold: 200 kg/m³

Easily painted.

USE

1/ Thoroughly mix each component in its original container.

2/ Weigh the appropriate amount and mix both components in a PP, PE, metal or glass container.

3/ Pour the mixture into a silicone rubber, metal or epoxy mold. Apply a release agent to a metal or epoxy mold.

WARNING: Component B is corrosive and a health hazard. Use protective goggles and gloves, ensure the work area is well ventilated.

Pot life

100 seconds (at 22-25°C)

Mixing ratio A:B

1:1

Dry to the touch

about 3 minutes

Reaction starts

40 seconds (at 22-25°C)

DANGEROUS

H315 Causes skin irritation.

H319 Causes severe eye irritation.

H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.

H317 May cause an allergic skin reaction.

H351 Suspected of causing cancer.

H335 May cause irritation of the respiratory tract.

H373 May cause damage to organs through prolonged or repeated exposure.

P101 If medical advice is needed, have product container or label at hand.

P102 Keep out of reach of children.

P103 Read the label before use.

P260 Do not inhale dust/smoke/gas/mist/vapors/aerosols.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P284 [In case of insufficient ventilation] wear respiratory protection equipment.

P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P405 Keep locked up.

P501 Dispose of contents/container in accordance with regulations.

Related products

FORTE for KREMENIT 1 l

Price with VAT:

6,10 €

E-PASTE 1050 modelling paste 500 g + 250 g

modelling paste for production of seamless models, contour shaped machinable blanks, mockups, composite toolings

Price with VAT:

18,91 €

KREMENIT WHITE porcelain-like ceramic powder 7 kg

Kremenit is a skin safe ceramic powder which hardens into a porcelain-like material with the addition of water. It cures at room temperature, burning is not necessary.

Price with VAT:

30,35 €

FLEXA liquid flexible polymer foam 10 kg + 5 kg

Liquid polymeric foam that hardens into a very rigid foam in a few minutes with an exothermic reaction.

Price with VAT:

219,60 €

EPOFORM 100 1000 + 500 g

A two-component polymer paste used as a reinforcing layer on EPS, XPS, (Styropor® Styrodur®), PU foams, wood, textile, metal, plastic (except PE, PP and PTFE). Used for making car, aviation and boat prototypes, museum replicas, molds, special effects objects…

Price with VAT:

33,72 €

ECOAT WHITE for coatings from 0.2 to 3 mm 1000 + 320 g

White epoxy resin for coatings from 0.2 - 3 mm. Can be used as a Gelcoat.

Price with VAT:

36,40 €

Izdelava spletne trgovine