Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
Biolava is an effective agent for removing paints and coatings. It is made from renewable solvents and surfactants. It does not contain methylene chloride or aromatic compounds.
Unlike older conventional removers, BIOLAVA works from the surface down, allowing for selective removal of layers of paint. This is especially important in the restoration profession.
Biolava has a gel consistency, which makes it easier to work on vertical surfaces.
DANGEROUS
H225 Flammable liquid and vapors.
H332 Harmful to health if inhaled.
H319 Causes severe eye irritation.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read the label before use.
P241 Use [electrical equipment/ventilation equipment/lighting equipment/…] that is explosion-proof.
P261 Do not inhale dust/smoke/gas/mist/vapors/aerosols.
P303 + P361 + P353 IN CASE OF CONTACT WITH SKIN (or hair): Immediately remove all contaminated clothing. Rinse skin with water [or shower].
P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 Dispose of contents/container in accordance with regulations.
Transparent binder for fast curing, single component solvent-based crack, joint and hole filler.
Ready to mix with sanding dust from the original wood.
Impregnating resin for deep hardening of porous, dry wood without the use of vacuum. Application: dipping, brushing, injecting into holes from woodworms. Solvent-based; quick drying
End Seal Transparent is a polymer coating based on water for protecting fresh wood from cracking, e.g., end grain and protecting raw materials from turning. The dry film is completely transparent. A double coat is recommended.
(ESACRYL 122 Holz Verfestiger) Consolidation (hardening, petrification, waterproofing) of wood. Binding/sealing and gluing of wooden items.Treatment of wood during production – improvement of properties.Protective top varnish for various types of surfaces.
Improve the mechanical features of wood _ Increase the dimensional stability of wood _ Increase hydrophobia _ Increase resistance against UV radiation and chemicals _ Increase resistance against weather conditions and aging
