MATERIALS FOR MOLD PRODUCTION

malleable polymer for mold making

malleable polymer for mold making

It is a two-component casting material for making elastic molds for casting objects from plaster, epoxy, polyurethane, methacrylate, and polyester resins, concrete, wax, and similar materials.

Ceramic mass for molds for casting non-ferrous metals and alloys.

MEGASIL is a fast curing silicone mold making putty used for making strong, long lasting molds. MEGASIL is easy to use.

MEGASIL is a fast curing silicone mold making putty used for making strong, long lasting molds. MEGASIL is easy to use. Mix equal parts of components A and B by hand (no scale needed). Used in restoration, jewelry making,...

MODRIN is a general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. MODRIN is preferred when undercuts are involved and a certain inherent stability of the mold is required.

MODRIN is a general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. MODRIN is preferred when undercuts are involved and a certain inherent stability of the mold is required.

MODRIN is a general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. MODRIN is preferred when undercuts are involved and a certain inherent stability of the mold is required.

High strength silicone rubber used for the most demanding molds.

High strength silicone rubber used for the most demanding molds.

White general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. Especially suitable for making specifically coloured molds.

White general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. Especially suitable for making specifically coloured molds.

White general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. Especially suitable for making specifically coloured molds.

White general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. Especially suitable for making specifically coloured molds.

Silicone rubber used for lifecasting/bodycasting.

Silicone rubber used for lifecasting / bodycasting.

Extremely soft, low-viscosity, high tear strength silicone gel.

Extremely soft, low-viscosity, high tear strength silicone gel.

Chocosil is a food contact approved silicone rubber used for making chocolate, pralines, marzipan and other confectioners' and baking molds.

Very accurate, extremely high tear strength translucent silicone used for prototype making, concrete casting...

Fast curing spray-on silicone rubber.

Thickener used for silicone rubbers Modrin MF and silicone rubber K-31

Thickener used for silicone rubbers Modrin MF and silicone rubber K-31

Skin safe elastic molding material used for lifecasting. VIVAFORM stays elastic for 24 hours or 2-3 days in an air-tight plastic bag.

Skin safe elastic molding material used for lifecasting / bodycasting. VIVAFORM stays elastic for 24 hours or 2-3 days in an air-tight plastic bag.

Crystal Flex is a transparent, two component silicone rubber with low viscosity. It hardens after 12 hours and is elastic but not very strong.

Natural rubber latex for very flexible moulds. Used for casting wax, gypsum, resins...

ALU INVEST Ceramic mold making powder used for casting aluminium and bronze

Ceramic material used for pouring glass objects.

ELASTOSIL® E41 TRANSPARENT is a flowable, one-component silicone rubber with excellent mechanical properties, which cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties, has good adhesion properties to many substrates, in particular on cured silicone rubber

ELASTOSIL® E43 TRANSPARENT is a self levelling, one-component acetoxy-cure silicone rubber which cures at room temperature under the influence of atmospheric moisture. It shows excellent mechanical properties, has good adhesion properties to many substrates. In particular used as adhesive on cured silicone rubber

Suitable for application on vertical surfaces.

FORMIT is a fast curing silicone mold making putty used for making strong, long lasting molds.

Pourable, addition (platinum) curing, two-component silicone rubber that vulcanizes at room temperature Very suitable for casting of all common reproduction materials, especially casting resins where absolutely accurate copies of models with pronounced undercuts.

High strength PUR elastomer; Shore A hardness: 45 Pot life: 10 min Demoulding time: 2 hours

It is a two-component casting compound for making flexible molds for pouring objects from plaster, epoxy, polyurethane, methacrylate, and polyester resins, concrete, wax, and similar materials.

High strength PUR elastomer; Shore A hardness: 45 Pot life: 10 min Demoulding time: 2 hours

Thickener used for silicone rubbers Modrin MF and silicone rubber K-31

Thickener used for silicone rubbers Modrin MF and silicone rubber K-31

Silicone rubber used for lifecasting / bodycasting.

MEGASIL FLEX is a very fast curing flexible silicone mold making putty used for making strong, long lasting molds. MEGASIL FLEX is easy to use.

MEGASIL FLEX is a very fast curing flexible silicone mold making putty used for making strong, long lasting molds. MEGASIL FLEX is easy to use.

Natural latex with additives. Used for making flexible molds from wax, gypsum, resin...

Very fast curing, translucent silicone rubber. Suitable for casting very accurate copies with undercuts.

Very fast curing, translucent silicone rubber. Suitable for casting very accurate copies with undercuts.

Very fast curing, translucent silicone rubber. Suitable for casting very accurate copies with undercuts.

Translucent and very soft silicone rubber. It is already used for making very soft molds, for special effects in films and theaters, orthopedics, and prosthetics.

Skin-friendly elastic material for making molds directly from the skin.