Naziv vsebine
Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
Oil for kitchen countertops, tables, and other load-bearing interior surfaces.
MEGASIL FLEX mold making polymer 1000 + 1000 g
MEGASIL FLEX is a very fast curing flexible silicone mold making putty used for making strong, long lasting molds. MEGASIL FLEX is easy to use.
Tax rate
22 %
Price with VAT:
49,41 €
MEGASIL FLEX is a very fast curing flexible silicone mold making putty used for making strong, long lasting molds. MEGASIL FLEX is easy to use. Mix equal parts of components A and B by hand (no scale needed). Used in restoration, jewelry making,...
MIXING RATIO: 1:1
POT LIFE (WORKING TIME): 1,5 min
HARDENING TIME (CURE TIME): 4 min
APPLICATIONS:
- restoration
- jewelry making
- restoring damaged wooden frames (paintings, mirrors,...)
- museum replicas
- ceramic molds
- making copies of leaves, stones....
- life casting
USE:
1. Prepare equal parts
of components A and B.
2. Mix intensively and quickly. (only 1,5 minutes for the total molding process).
3. Cover the model with the rubber by slowly driving the air out of the mold.
Related products
Crystal Flex is a transparent, two component silicone rubber with low viscosity. It hardens after 12 hours and is elastic but not very strong.
Price with VAT:
25,62 €
MODRIN is a general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. MODRIN is preferred when undercuts are involved and a certain inherent stability of the mold is required.
Price with VAT:
25,62 €
Skin safe elastic molding material used for lifecasting / bodycasting. VIVAFORM stays elastic for 24 hours or 2-3 days in an air-tight plastic bag.
Price with VAT:
12,20 €
White general-purpose mold-making material suitable for casting resins, wax, gypsum, etc. Especially suitable for making specifically coloured molds.
Price with VAT:
24,40 €
It is a two-component casting material for making elastic molds for casting objects from plaster, epoxy, polyurethane, methacrylate, and polyester resins, concrete, wax, and similar materials.
Price with VAT:
35,94 €
