Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.

CHOOSING THE RIGHT EPOXY RESIN

When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.

REVIVO FIX L-TR / MECOSAN L-TR 750 g

Adhesive for the reconstruction of ceramics and pottery in archaeology. Joints made with Mecosan L-TR are resistant to water, oil, grease, gasoline, and alcohol.

Need additional information?

Tax rate

22 %

Price with VAT:

45,52 €

ADD TO CART

- bonding metals, especially iron, aluminum, and its
alloys with absorbent materials such as wood, leather, felt,
cardboard, textiles,..
- bonding ceramics, concrete, bricks, and natural stone
- for mixing sandstone
- bonding in modeling
- securing threads on screws and insulating electrical wires

There are two possible methods of bonding: wet bonding and bonding with activation:
1. Wet bonding: apply the adhesive to one or both surfaces and immediately join them.

2. Bonding with activation: Apply to both surfaces and wait for it to dry.
With a very thin layer of adhesive, we activate the adhesive layer and press both surfaces together. This
prevents excessive adhesive from leaking into the absorbent bonded material.

H225 Flammable liquid and vapors.

H260 In contact with water, flammable gases are released which may ignite spontaneously.

H319 Causes severe eye irritation.

H336 May cause drowsiness or dizziness.

H412 Harmful to aquatic life with long lasting effects.

P101 If medical advice is needed, have product container or label at hand.

P223 Prevent contact with water.

P303 + P361 + P353 IN CASE OF CONTACT WITH SKIN (or hair): Immediately remove all contaminated clothing. Rinse skin with water [or shower].

P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P501 Dispose of contents/container in accordance with regulations.

Related products

ARES 33 acrylic emulsion 1 l

ARES 33 is a pure acrylic dispersion made using the latest emulsification technology. The particle sizes of the emulsion are significantly smaller than those of emulsions produced by traditional manufacturing methods. The dry film is hard, yet still tough and flexible, ensuring durability during the expansion and contraction of wood, stone, and mineral substrates. The film is UV resistant and does not yellow over the years. It is completely insoluble in water and resistant to hydrolysis. The dry film is completely transparent and non-tacky. It has good adhesion even on old alkyd binders.

Price with VAT:

11,96 €

SOKRAT 32 S dispersing agent 1 kg

A water based dispersing agent, for preparing acrylic water based paints, gessos, patching compounds, slurries. Good wetting of calcium carbonate, kaolin, china flay, etc.

Price with VAT:

35,38 €

Sodium alginate E 401 100 g

Price with VAT:

13,42 €

ARES TEX 100 ml

Price with VAT:

3,66 €

FASTICK MV middle viscosity 20 g

Fastick Medium MV is a "multi-purpose" ethyl cyanoacrylate super glue that possesses an oil-like viscosity. This means that the medium viscosity instant adhesive has properties of both the thin CA and thick CA.

Price with VAT:

4,45 €

STABILIT AQUA 1l

Stabilit Aqua is an effective UV stable water-based binder, designed for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials.

Price with VAT:

14,88 €

Izdelava spletne trgovine