SOLARIS ANTIFRIZ blue, based on glycols and corrosion inhibitors, is suitable for use in cooling, heating and air conditioning systems, food freezing, solar collectors, heat pumps, biogas plants, and more.

STABILIT AQUA

agent for solidifying loose gravel, sand, wood chips, bark, and similar decorative materials in bulk.

CHOOSING THE RIGHT EPOXY RESIN

When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.

HARTOL LUX hard-drying oil

Oil for kitchen countertops, tables, and other load-bearing interior surfaces.

Ecoat; 2x coating with intermediate sanding with 240

ECOAT for coatings from 0.2 to 3 mm 200 90 g

ECOAT for coatings from 0.2 to 3 mm 200 + 90g

Clear epoxy resin for coatings from 0,2 - 3 mm. Suitable for all food contact applications.

Need additional information?

Tax rate

22 %

Price with VAT:

17,49 €

ADD TO CART

Clear epoxy resin for coatings from 0,2 - 3 mm.

Mixing ratio (by weight): 100 : 45

Pot life (160 g, at 20°C): cca. 20 min

Hardening time (at 20°C): 24 h

In order to destroy the air bubbles on the surface you can blow it with hot air by means of a common hair dryer or with a high quality gas burner.

DANGEROUS

H315 Causes skin irritation.

H319 Causes severe eye irritation.

H317 May cause an allergic skin reaction.

H411 Toxic to aquatic life with long lasting effects.

H314 Causes severe skin burns and eye damage.

H412 Harmful to aquatic life with long lasting effects.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P310 Immediately call the POISON CENTER/doctor/….

P261 Do not inhale dust/smoke/gas/mist/vapors/aerosols.

P273 Prevent release into the environment.

P333 + P313 If skin irritation occurs or rash appears: seek medical advice/attention.

Related products

3D POX kneadable epoxy putty 800 + 400 g

3D-POX is a two-component, solvent-free, kneadable epoxy. It is moldable, carvable, strong, and exhibits excellent adhesion to a variety of substrates. It is easily sanded and will accept paint, screws and nails.

Price with VAT:

27,25 €

SOLIDA Liquid rigid polymer foam 1 kg + 1 kg

Liquid polymeric foam that hardens into a very rigid foam in a few minutes with an exothermic reaction.

Price with VAT:

35,38 €

MODELIT STANDARD cold casting urethane resin 500 g + 500 g

Fast curing two-component urethane, used for casting precise model parts, prototypes, tooling boards, casting in electronics; also used as an adhesive..

Price with VAT:

19,52 €

MODELIT KRONOS fast casting polyurethane 5 + 5 kg

Two-component polyurethane which cures after 5-6 minutes into a very hard but tough material. Appropriate for manual or machine use.

Price with VAT:

134,20 €

FISH GEL Liqui 500 ml

FISH GEL LIQUI - reversible polymer for making soft baits for fishing (curing 20 min at 160°C)

Price with VAT:

9,76 €

IZI light weight, rigid polymer foam 1 kg + 1 kg

Light weight liquid polymer foam which hardens into a rigid foam in a few minutes with an exothermic reaction.