Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
Apply on a clean, dry surface at a temperature higher than 10ºC.
Can be mixed with marble, wood powder, Mikrosil (hollow glass microcpheres), talcum and / or pigments and used as a putty and repairung compound.
DANGEROUS
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
Sum of harmfulness for fertility. Sum of harmfulness for the unborn child.
H411 Toxic to aquatic life with long lasting effects.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read the label before use.
P303 + P361 + P353 IN CASE OF CONTACT WITH SKIN (or hair): Immediately remove all contaminated clothing. Rinse skin with water [or shower].
P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P501 Dispose of contents/container in accordance with regulations.
ARES 33 is a pure acrylic dispersion made using the latest emulsification technology. The particle sizes of the emulsion are significantly smaller than those of emulsions produced by traditional manufacturing methods. The dry film is hard, yet still tough and flexible, ensuring durability during the expansion and contraction of wood, stone, and mineral substrates. The film is UV resistant and does not yellow over the years. It is completely insoluble in water and resistant to hydrolysis. The dry film is completely transparent and non-tacky. It has good adhesion even on old alkyd binders.
RES 33 is a pure acrylic dispersion, produced using the latest emulsification technology. The particle sizes of the emulsion are significantly smaller than those of emulsions made using traditional production methods. The dry film is hard, yet still tough and flexible, ensuring durability during the expansion and contraction of wood, stone, and mineral substrates. The film is UV resistant and does not yellow over the years. It is completely insoluble in water and resistant to hydrolysis. The dry film is completely transparent and non-sticky. It has good adhesion even on old alkyd binders.
