Naziv vsebine
Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
Oil for kitchen countertops, tables, and other load-bearing interior surfaces.
STONIT mineral stone-like casting material 29,55 kg
STONIT is a high-quality inorganic casting material, suitable for the production of weather-resistant products similar to natural stone. It can be pigmented with inorganic alkali resistant pigments.
Tax rate
22 %
Price with VAT:
84,18 €
STONIT - MINERAL STONE-LIKE CASTING MATERIAL
STONIT casting
is a high-quality inorganic casting material, suitable for the production of weather-resistant products similar to natural stone. It can be pigmented with inorganic alkali resistant pigments.The dosage of the pigments is usually from 1-5 % to the weight of the binder.
We recommend the use of 1-2% of AR glassfibres (12 mm length) for reinforcement of thin-walled products.
ADVANTAGES
- High density
- Low sensitivity to dirt
- Fast curing
- High resistance at low temperatures
- High resistance to wear
Mixing ratio A:B ( by weight)
A (powder) 100 : B (liquid) 18
Compressive strength at 20˚C after 1 day
55 N/mm2
Compressive strength at 20˚C after 28 days
above 100 N/mm2
Flexural strength at 20˚C after 28 days
approx. 15 N/mm²
Colour
white
Related products
Kremenit is a skin safe ceramic powder which hardens into a porcelain-like material with the addition of water. It cures at room temperature, burning is not necessary.
Price with VAT:
35,38 €
Liquid polymeric foam whichhardens into a flexible foam in a few minutes with an exothermic reaction.
Price with VAT:
24,71 €
A two-component polymer paste used as a reinforcing layer on EPS, XPS, (Styropor® Styrodur®), PU foams, wood, textile, metal, plastic (except PE, PP and PTFE).
Used for making car, aviation and boat prototypes, museum replicas, molds, special effects objects…
Price with VAT:
243,90 €
Two-component polyurethane which cures after 5-6 minutes into a very hard but tough material. Appropriate for manual or machine use.
Price with VAT:
26,84 €
Porcelain-like mass for casting into molds.
Price with VAT:
18,30 €
Neutral, fast-setting paste for filling cracks, knots, voids and other irregularities in wood. Meant to be pigmented with VIVAT pigments or KOLORO EPO pastes.
Price with VAT:
98,64 €
