LAMEPOX 23 epoxy laminating resin 1000 + 230 g

LAMEPOX 23

High performance general purpose epoxy laminating resin for use in wet-lay or vacuum bagging glass fibre, Kevlar or carbon fibre lamination.

Lamepox 23 is specifically designed for simple use in resin/fiberglass composite construction.
It is exceptionally compatible in wood/fiberglass/epoxy composites.
Lamepox 23 is unfilled, has low viscosity, is odorless and cures at room temperature.

Mixing ratio: 100:23

Pot life: 130-140 minutes

For best mixing we recommend that Part A and Part B are thoroughly mixed in one container, and then put into a second container and mixed again with a new mixing stick or a clean paddle blade. This will ensure that no unmixed residue contaminates the final application mix.

Cured epoxy displays exceptional physical and performance properties. It can be sanded, shaped, machined, drilled, tapped and painted.

Lamepox 23 is also very convenient for impregnation of rotted wood.
Deep penetration of epoxy into rotted wood makes the wood hard and stable.