Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.

CHOOSING THE RIGHT EPOXY RESIN

When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.

HARTOL LUX hard-drying oil

Oil for kitchen countertops, tables, and other load-bearing interior surfaces.

TOP GRIF polyurethane casting resin for climbing holds 1 kg + 1 kg

TOP GRIF is a two-component polyurethane resin used for casting high quality climbing holds.

Need additional information?

Tax rate

22 %

Price with VAT:

30,00 €

ADD TO CART

TOP GRIF

Top Grif HQ consists of low viscosity casting resins that yield virtually bubble-free off-white castings.

Top Grif is easy to mix and pour, offering the convenience of a 1A:1B by weight mixing ratio.

Top Grif readily accepts pigments and fillers (such as Filler K-5, Geba or Rondofil from Samson Kamnik).
Fully cured castings are tough, durable, machinable and paintable.

They resist moisture and mild solvents.

Applications for Top Grif HQ include reproducing small to medium size sculptures, production of climbing holds, making prototype models, special effect props, decorative jewelry and taxidermy (bones, antlers, teeth).

Pot life

8-10 min at 23°C

Mixing ratio A:B

1:1

Curing time, demolding

1 hour (depending on the weight of the cast)

WARNING

H319 Causes severe eye irritation.

H332 Harmful to health if inhaled.

H315 Causes skin irritation.

H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.

H317 May cause an allergic skin reaction.

H351 Suspected of causing cancer.

P101 If medical advice is needed, have product container or label at hand.

P260 Do not inhale dust/smoke/gas/mist/vapors/aerosols.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P284 [In case of insufficient ventilation] wear respiratory protection equipment.

P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

P405 Keep locked up.

P501 Dispose of contents/container in accordance with regulations.

Related products

TRIDE-FLEX transparent resin for 3D labels 100 g + 100 g

Transparent, UV stable resin used for 3D labels

Price with VAT:

18,30 €

KREMENIT WHITE porcelain-like ceramic powder 2,5 kg

Kremenit is a skin safe ceramic powder which hardens into a porcelain-like material with the addition of water. It cures at room temperature, burning is not necessary.

Price with VAT:

13,42 €

SOLIDA Liquid rigid polymer foam 5 kg+ 5 kg

Liquid polymeric foam that hardens into a very rigid foam in a few minutes with an exothermic reaction.

Price with VAT:

158,60 €

EPOFORM 100 1000 + 500 g

A two-component polymer paste used as a reinforcing layer on EPS, XPS, (Styropor® Styrodur®), PU foams, wood, textile, metal, plastic (except PE, PP and PTFE). Used for making car, aviation and boat prototypes, museum replicas, molds, special effects objects…

Price with VAT:

33,72 €

FAST SEAL amber transparent 10 + 5 kg

Fastseal is a fast setting resin with a very short pot life. Used for sealing wood prior to casting with Crystalres.

Price with VAT:

258,25 €

VACUSEAL WOOD resin for wood stabilization 10 l

VACUSEAL WOOD is a resin for vacuum impregnation and curing and stabilization of wood and other porous surfaces at 90°C. For coloring, you can use KOLORO P dyes.

Price with VAT:

233,14 €

Izdelava spletne trgovine