Naziv vsebine
Single-component adhesive designed for bonding dry and wet wood, wooden elements, window frames, staircases, as well as for bonding wood with foam polystyrene, mineral and glass wool, PUR foam, cardboard.
When considering which type of resin to use, several questions come to mind. We try to answer them all in this post.
Oil for kitchen countertops, tables, and other load-bearing interior surfaces.
BLACKWOOD NEUTRAL 2,5 + 2,5 kg
Neutral, fast-setting paste for filling cracks, knots, voids and other irregularities in wood. Meant to be pigmented with VIVAT pigments or KOLORO EPO pastes.
Tax rate
22 %
Price with VAT:
98,64 €
- permanent repairs with no shrinkage
- for interior and exterior wood
- easy 1 : 1 mixing ratio (by weight)
- to be pigmented with VIVAT pigments or KOLORO EPO pastes
Maximum layer thickness is 10 - 15 mm.
For thicker items, simply apply in several layers.
Can be sanded after approx. 2 hours (the exact time depends on the thickness of the layer)
Mixing ratio A : B by weight 100 : 100
Mixing ratio A : B by volume 100 : 75
Pot life: 20°C (100 g) min 10
Hardening time at room temperature (20°C) 30 min for thicker layers
up to 2 h for thinner layers
Maximum layer thickness: mm 10-15
Related products
STONIT is a high-quality inorganic casting material, suitable for the production of weather-resistant products similar to natural stone. It can be pigmented with inorganic alkali resistant pigments.
Price with VAT:
84,18 €
Liquid polymeric foam that hardens into a very rigid foam in a few minutes with an exothermic reaction.
Price with VAT:
219,60 €
Kremenit is a skin safe ceramic powder which hardens into a porcelain-like material with the addition of water. It cures at room temperature, burning is not necessary.
Price with VAT:
7,08 €
STONIT is a high-quality inorganic casting material, suitable for the production of weather-resistant products similar to natural stone. It can be pigmented with inorganic alkali resistant pigments.
Price with VAT:
23,18 €
A two-component polymer paste used as a reinforcing layer on EPS, XPS, (Styropor® Styrodur®), PU foams, wood, textile, metal, plastic (except PE, PP and PTFE).
Used for making car, aviation and boat prototypes, museum replicas, molds, special effects objects…
Price with VAT:
243,90 €
modelling paste for production of seamless models, contour shaped machinable blanks, mockups, composite toolings
Price with VAT:
18,91 €
