Naziv vsebine
ECOAT for coatings from 0.2 to 3 mm 1000 + 450 g
Clear epoxy resin for coatings from 0,2 - 3 mm.
Mixing ratio (by weight): 100 : 45
Pot life (160 g, at 20°C): cca. 20 min
Hardening time (at 20°C): 24 h
In order to destroy the air bubbles on the surface you can blow it with hot air by means of a common hair dryer or with a high quality gas burner.
DANGEROUS
H315 Causes skin irritation.
H319 Causes severe eye irritation.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
H314 Causes severe skin burns and eye damage.
H412 Harmful to aquatic life with long lasting effects.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305 + P351 + P338 IN CASE OF CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call the POISON CENTER/doctor/….
P261 Do not inhale dust/smoke/gas/mist/vapors/aerosols.
P273 Prevent release into the environment.
P333 + P313 If skin irritation occurs or rash appears: seek medical advice/attention.
Related products
